产品展示

CJ16/19切换电容器接触器

一、概述 General description
  CJ16/19型切换电容器接触器是本公司早期参照德国西门子公司制造的3TK44cahacitorcontactor(电容器接触器)改进设计制造的,它的结构紧凑,主电路与电阻切合电路寓于一体,主电路接线方便,是控制小容量电容器常用的接触器。
  CJ16/19is developd by our company on the base of 3TK44 capacitor contactor of Siemenscompany Germany. It ’ s structure is compact, maincircuit composed with resistanc on-off switch. joint the main circuit is convenience, is nidely used as a contactor in controlling small electriccapacitor , the model meaning as right.
二、型号及含义 Modelimplication
三、技术参数 Technical parameter
1.使用条件:海拔≤2000m,环境温度-25℃~+40℃,湿度+25℃时,≤90%, 安装面倾斜≤5°
2.额定绝缘电压:500V
3.控制线圈工作电压范围:85~110%额定电压
4.机械寿命不低于100万次
5.电寿命不低于10万次
6.辅助电路绝缘电压为500V,额定电流为6A,辅助触头寿命为10万次
7.限制合闸涌流 | ≤20Ic
8.控制线圈的电压等级:交流48V,127V,220V,380V
9.可控制三相电力电容最大容量(见表)
1.Work condition: Altirude low than 2000m, ambient temperature: -25℃~+40℃, the hunmidity: 90% when 5°
2.Rated insulated voltage: 500V
3.The working voltage of control core: 85~110% rated voltage
4.Machine life: Not low than 100, 00 times
5.E;cctric life: Not than 10, 00 times
6.Assist elecaric circuit insulate voltage:500V, rated current: 6A, assist contact life: 100, 00 times
7.Contarol flashy current ability: 1≤20Ic
8.The voltage grade of control core: AC 48V, 127V, 220V, 380V
9.The max controllable capacity to three phaxe power capacitor : See following.
型号
Model
额定绝缘电压(V)
Rated msultion voltage
额定工作电压(KV)
Rated voltage
额定工作电流(A)
Rated ourrent
AC68下工作电流(A)
Working current at AC68
长期工作额定高压(A)
Longtime work rated high valtage
额定控制容量(Kvar)
Rated contolling capacifincez
CJ16-25 500 220/380 25 17 25 12
CJ16-32 32 23 32 16
CJ16-43 43 29 43 20
CJ16-63 63 43 63 30
CJ16-95 95 63 95 44
四、特点 Features
  接触器的接触系统是由上下两层八个触头组成三极主电路,每极主电路中都有一个触头是提前接通的,切合电阻只有两路,因为电容器组是三角形连接,故当电阻切合电路接通时,没相电容电路中均有电阻接入。
  接触器备有两个辅助触头,其功能有两常开或两常闭或一常开一常闭,由用户在订货时选定。接触器安装方便,可用两只M4螺钉固定也可使用35mm安装轨固定。
  The contact system of contactor is three-phase main circuit, composed by eight pieces contactblock from upside and daminside. There is one contact block was switch on in advance in eachmain circuit, switch-over resistro only two, the cap acitor groupis jointed as triangle, so whenresistor switch over circuit was sitchon, every capacitor circuit will be connected with resistor.
  The contactor have two pieces of auxilliary contact block, the function is 2NO, or 2NC or 1NO+1NC, this is chosed by user.
  The mounting of this contactor is very convenience, you can use two pieces of M4 screw makeit stable, or can use 35 mmDin real mount it. Over all Dimenseon as following.
五、规格及尺寸 Model and Dimension