产品列表
- BSMJ自愈式并联电容器
- BSMJ分相补偿并联电容器
- BFM高电压并联电容器
- JK系列智能组合式低压电力电容器
- XXFD-2000配电综合测控仪
- JKWF-12系列无功功率自动补偿控制器
- JKWF-16系列无功功率自动补偿控制器
- RPCF-16系列无功功率自动补偿控制器
- XXGY-2高压无功补偿控制器
- JK系列智能无功功率自动补偿控制器
- JKW5C系列无功功率自动补偿控制器
- JKW58系列无功功率自动补偿控制器
- JKWD5无功动态自动补偿控制器
- JKWF动态调谐滤功率因数自动补偿系统
- XXFK智能复合开关
产品搜索
联系我们
上海威斯康电器集团(香港)有限公司
(浙江九盛电力设备有限公司)
地址:浙江省乐清市柳市方斗岩东工业区
电话:0577-62869007 62869008
传真:0577-62869006
全国免费客服热线:400 007 5955
产品展示
CPR12/5出口型无功功率自动补偿控制器
General |
Power factor regulator performs the control and adjustment with full digits, it displays accurate and reliable readings of power factor, can’ t be affected for aging of electronic elements, Its oroper control calculation method can made the equipment, even the system of high harmonic content operate correctly. Because it has the ability of calculating the reactive reactivepower, the switching capacitor bank can adjust the power factor timely and clearly. Under equal rated value of capacitorband, the operation frequency and similar using frequency can be reduced greatly. |
Set parameter |
In the manual state press MODE key to set, the display indicates "SEt" 1s, which means that the regulator entersinto the state of SETUP. Press MODE key to see parameters, when delay goes on, the delay time is set, the display indicated the setting data(s). Press"-" Key or "+" key to amend the parameters. Press MODE key to set the next parameter, when LED2 goes on, the over voltage protecton value is set, the display indicates the setting data(V). Press MODE key again, when 1 goes on, under current locking current is set, the display indicates the setting data(A). Press MODE key again; when cos goes on, COS φ value is set, the display indicates the setting date. When the last parameter is finished setting, please press MODE key again go exit SETUP and store all presetting parameters |